QS 205 motor V3...
I've just watched this presentation by Grin Tech, at 2:16:00, Justin from Grin Tech explains that the torque for different kv motors will be the same, and efficiency is also the same, but a higher kv motor will allow for higher speeds when climbing the same hill (provided we input higher phase amps).
https://www.youtube.com/watch?v=c96n0Ma2rLY&ab_channel=GrinTechnologies
Can I conclude from this that having it if I have high enough battery and phase amps, I can go with a higher kv motor (QS 205 3T), as this will give me the best of both worlds (high torque for hills and high top speeds).
Why is everyone pushing for higher turn motors (4T and 5T), when we can achieve the same amount of torque by pushing through higher amps through a 3T motor.
Am I correct?
My planned setup:
QS205 V3 4T motor (but would like to go to 3T for higher speeds)
Sabvoton 200A controller (battery amps)
79.2V 22s15p battery (able to push out 300 battery amps in short bursts)
I would like to achieve high speeds of 90 - 100 kph but would also like to have massive low end torque.
Thanks!
I've just watched this presentation by Grin Tech, at 2:16:00, Justin from Grin Tech explains that the torque for different kv motors will be the same, and efficiency is also the same, but a higher kv motor will allow for higher speeds when climbing the same hill (provided we input higher phase amps).
https://www.youtube.com/watch?v=c96n0Ma2rLY&ab_channel=GrinTechnologies
Can I conclude from this that having it if I have high enough battery and phase amps, I can go with a higher kv motor (QS 205 3T), as this will give me the best of both worlds (high torque for hills and high top speeds).
Why is everyone pushing for higher turn motors (4T and 5T), when we can achieve the same amount of torque by pushing through higher amps through a 3T motor.
Am I correct?
My planned setup:
QS205 V3 4T motor (but would like to go to 3T for higher speeds)
Sabvoton 200A controller (battery amps)
79.2V 22s15p battery (able to push out 300 battery amps in short bursts)
I would like to achieve high speeds of 90 - 100 kph but would also like to have massive low end torque.
Thanks!