Hi guys how are you?
I know this isnt the same for each QS205 owner as there are many variables. To round things off to make it easier, if one had a controller set at 200a and 24s pack (100v) for 20kw. How long would you think the motor would hold up at max. throttle assuming all other componants such as wiring/connectors of the system didnt fail??
I thought i seen detailed specs in an older thread by an experienced member on here but I cant find it. The test specs may have been for the mxus 3k. Im not really sure.
Ive ran 20kw and i reached 100kph but i was always concerned at how long i could maintain that speed for if on a highway etc.
Has anyone tested in the risky area before with this motor? Im sure some have since its a popular motor.
Thanks!!
I know this isnt the same for each QS205 owner as there are many variables. To round things off to make it easier, if one had a controller set at 200a and 24s pack (100v) for 20kw. How long would you think the motor would hold up at max. throttle assuming all other componants such as wiring/connectors of the system didnt fail??
I thought i seen detailed specs in an older thread by an experienced member on here but I cant find it. The test specs may have been for the mxus 3k. Im not really sure.
Ive ran 20kw and i reached 100kph but i was always concerned at how long i could maintain that speed for if on a highway etc.
Has anyone tested in the risky area before with this motor? Im sure some have since its a popular motor.
Thanks!!