Need a 24-inch 36h rim that fits 24x3.0 tire.

General Discussion about electric bicycles.
Post Reply
pullin-gs   100 W

100 W
Posts: 295
Joined: Jul 31 2009 8:26pm

Need a 24-inch 36h rim that fits 24x3.0 tire.

Post by pullin-gs » Apr 04 2021 4:08pm

New build using 24x3 tires.
Any suggestions for a rim that will work for 3-inch wide tire?
Needs to be 36H for motor. Would be nice if same rim could be had in 32H for front as well.

Thanks

P

markz   100 GW

100 GW
Posts: 12229
Joined: Jan 09 2014 11:38pm

Re: Need a 24-inch 36h rim that fits 24x3.0 tire.

Post by markz » Apr 04 2021 4:35pm

For 2.8" tire in both 36H and 32H - https://www.halowheels.com/shop/compone ... as-24-rim/

3" tire = 35-44mm inner rim width
1.png
1.png (475.76 KiB) Viewed 233 times

User avatar
MadRhino   100 GW

100 GW
Posts: 7428
Joined: Sep 03 2010 5:28pm
Location: Montreal QC Canada

Re: Need a 24-inch 36h rim that fits 24x3.0 tire.

Post by MadRhino » Apr 04 2021 4:42pm

I like this one, that I ride on my city commuter. ERD 507, 57mm wide.

https://classic-cycle.com/all/1499/alu- ... atte?c=414
Make it fool-proof, and I will make a better fool.

markz   100 GW

100 GW
Posts: 12229
Joined: Jan 09 2014 11:38pm

Re: Need a 24-inch 36h rim that fits 24x3.0 tire.

Post by markz » Apr 04 2021 6:41pm

Do you require a rim with machined side walls for rim brake application?

Do you require single wall or double walled rim?

Do you want spoke hole eyelets or not?
pullin-gs wrote:
Apr 04 2021 4:08pm
New build using 24x3 tires.
Any suggestions for a rim that will work for 3-inch wide tire?
Needs to be 36H for motor. Would be nice if same rim could be had in 32H for front as well.

pullin-gs   100 W

100 W
Posts: 295
Joined: Jul 31 2009 8:26pm

Re: Need a 24-inch 36h rim that fits 24x3.0 tire.

Post by pullin-gs » Apr 04 2021 7:42pm

markz wrote:
Apr 04 2021 6:41pm
Do you require a rim with machined side walls for rim brake application?

Do you require single wall or double walled rim?

Do you want spoke hole eyelets or not?
pullin-gs wrote:
Apr 04 2021 4:08pm
New build using 24x3 tires.
Any suggestions for a rim that will work for 3-inch wide tire?
Needs to be 36H for motor. Would be nice if same rim could be had in 32H for front as well.
Would take ANY rim I could find due to lack of any choices.
Will be running disk hubs.....could care less if it is machnined or not.
Do not care single or double wall.
Eyelets nice, but not required.

goatman   1 GW

1 GW
Posts: 3065
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Need a 24-inch 36h rim that fits 24x3.0 tire.

Post by goatman » Apr 04 2021 9:45pm


pullin-gs   100 W

100 W
Posts: 295
Joined: Jul 31 2009 8:26pm

Re: Need a 24-inch 36h rim that fits 24x3.0 tire.

Post by pullin-gs » Apr 06 2021 9:04am

goatman wrote:
Apr 04 2021 9:45pm
36h
https://ebikes.ca/shop/electric-bicycle ... 4-fat.html

32h
https://ebikes.ca/shop/electric-bicycle ... t-32h.html

you might as well get the sapim spokes from grin as well
Site is not taking new orders right now. They are undergoing maintenance and catching up with backlogged deliveries.
Thanks all for replies.
I went with two 24" 36H Alex DX32 rims (507x32). 
32mm inside diameter is not as wide as I would have liked, but It will work OK for my purpose and price was good.
​​​​​​​P

Post Reply