LaRocoCoco
1 µW
- Joined
- Apr 9, 2021
- Messages
- 2
Hi and greetings from Austria, my name is Andreas and i thought about starting to build an EBike.
I am from the "esk8-news" community, already build an ESK8 and working on an OneWheel.
I did some research and need some help regarding the materials and knowledge about it.
Also my basement has limited space and customization possibilitys.
General information:
1. Overall the target distance should be 60km (Town to Twon).
2. The target speed should be about 60kph. Average 40kph.
3. Rider weight 70kg.
4. Brake type disc ok.
I will walk step by step through the information i already collected.
Frame - Vector Light:
At some point i stumbled over the Vector light frame and i like it.
In Arturs Post i didn't find any negative feedback.
Hub Motor Variant A - XOFO DD45:
When using the DD45 it can only fit a single speed freewheel as i understand.
I think it is no big issue if i do not have any gears.
If you think this is a big "no no", i am greateful for every suggestion.
Hub Motor Variant B - MXUS 3k Turbo:
I have seen a recomindation of the motor in this post.
I don't know if it can fit a single or multispeed freewheel.
Also i did not find a seller with a better price who also looks trustworthy (e.g. Aliexpress)
Controller - Little FOCer:
This is an VESC based Controller from Shaman at the esk8 forum.
There should also be an already merged PAS support on Github if necessary.
I also thought about usinge Phaserunner from GRIN Technologies.
As i have noticed there are some BESC controllers around based on Vedders project.
BMS - DieBieMS:
This is an BMS from ENNOID at the esk8 forum.
On complication i will use any of Litechpower.
Battery Pack:
Target voltage is 72V.
Quantity, brand and so on, will be figured out when i got the frame.
Battery will be build by myselft.
The bigger problem at them moment is the avaibility.
General:
Suspension, Spring and Brakes from Vector.
Throttle & Torque Sensor form GRIN Technologies.
Charger from Aliexpress.
Question:
If the end result has no gear shift, does the bike with an suspension need an chain tensioner?
Do i miss something? Any suggestions?
Conclusion:
This project is no urgent mather.
I just started to collect all the information.
Yours Andreas
I am from the "esk8-news" community, already build an ESK8 and working on an OneWheel.
I did some research and need some help regarding the materials and knowledge about it.
Also my basement has limited space and customization possibilitys.
General information:
1. Overall the target distance should be 60km (Town to Twon).
2. The target speed should be about 60kph. Average 40kph.
3. Rider weight 70kg.
4. Brake type disc ok.
I will walk step by step through the information i already collected.
Frame - Vector Light:
At some point i stumbled over the Vector light frame and i like it.
In Arturs Post i didn't find any negative feedback.
Hub Motor Variant A - XOFO DD45:
When using the DD45 it can only fit a single speed freewheel as i understand.
I think it is no big issue if i do not have any gears.
If you think this is a big "no no", i am greateful for every suggestion.
Hub Motor Variant B - MXUS 3k Turbo:
I have seen a recomindation of the motor in this post.
I don't know if it can fit a single or multispeed freewheel.
Also i did not find a seller with a better price who also looks trustworthy (e.g. Aliexpress)
Controller - Little FOCer:
This is an VESC based Controller from Shaman at the esk8 forum.
There should also be an already merged PAS support on Github if necessary.
I also thought about usinge Phaserunner from GRIN Technologies.
As i have noticed there are some BESC controllers around based on Vedders project.
BMS - DieBieMS:
This is an BMS from ENNOID at the esk8 forum.
On complication i will use any of Litechpower.
Battery Pack:
Target voltage is 72V.
Quantity, brand and so on, will be figured out when i got the frame.
Battery will be build by myselft.
The bigger problem at them moment is the avaibility.
General:
Suspension, Spring and Brakes from Vector.
Throttle & Torque Sensor form GRIN Technologies.
Charger from Aliexpress.
Question:
If the end result has no gear shift, does the bike with an suspension need an chain tensioner?
Do i miss something? Any suggestions?
Conclusion:
This project is no urgent mather.
I just started to collect all the information.
Yours Andreas