dequinox
10 kW
I'd been trying to figure out a way to mount this hailong pack to my RBF Cruiser (Root Beer Float, see this build thread), and there wasn't enough room on the seat tube, and I didn't want to hang it upside-down on the top tubes.
Instead I came up with this little doodad that allowed me to connect a straight battery mount to a curved surface with hose clamps.
See photos below for the rough build progression:
![20210422_222610.jpg 20210422_222610.jpg](https://endless-sphere.com/sphere/data/attachments/164/164569-a6ab81f3b2305dc831bd8881c8718ab0.jpg)
![20210422_225454.jpg 20210422_225454.jpg](https://endless-sphere.com/sphere/data/attachments/164/164576-c5ab2352ec7b31e9f9993f507576dee3.jpg)
![20210422_222652.jpg 20210422_222652.jpg](https://endless-sphere.com/sphere/data/attachments/164/164570-339a641faa14567977f7ac72b8118364.jpg)
![20210422_222726.jpg 20210422_222726.jpg](https://endless-sphere.com/sphere/data/attachments/164/164571-a987b4d9e09c2287aa8d9adf5fcc0314.jpg)
![20210422_223212.jpg 20210422_223212.jpg](https://endless-sphere.com/sphere/data/attachments/164/164572-61af0dc94ad35aa0c92a7ab5dbf30a5f.jpg)
![20210422_223415.jpg 20210422_223415.jpg](https://endless-sphere.com/sphere/data/attachments/164/164573-f63f8ea4b1e731f97785fc734d2938fd.jpg)
![20210422_223449.jpg 20210422_223449.jpg](https://endless-sphere.com/sphere/data/attachments/164/164574-7f25032d0387efe6d93c86934059d889.jpg)
![20210422_223555.jpg 20210422_223555.jpg](https://endless-sphere.com/sphere/data/attachments/164/164575-66991b593c2016cb408582e4131e12e9.jpg)
![20210422_225830.jpg 20210422_225830.jpg](https://endless-sphere.com/sphere/data/attachments/164/164577-6331a6f6afb1f66466a354d389961496.jpg)
![20210422_233034.jpg 20210422_233034.jpg](https://endless-sphere.com/sphere/data/attachments/164/164578-78a00563b956385dc665e71e8f3f5263.jpg)
![20210422_233050.jpg 20210422_233050.jpg](https://endless-sphere.com/sphere/data/attachments/164/164579-6e65562826ce9c848ff36b1fa3b5013e.jpg)
![20210422_233806.jpg 20210422_233806.jpg](https://endless-sphere.com/sphere/data/attachments/164/164580-3ea07f5f92192c690db3465a97a13aa5.jpg)
![20210422_234130.jpg 20210422_234130.jpg](https://endless-sphere.com/sphere/data/attachments/164/164581-b919fb71a3681811037a2a5ff05db49e.jpg)
![20210422_234624.jpg 20210422_234624.jpg](https://endless-sphere.com/sphere/data/attachments/164/164582-e83229a9c6862ce92d785d14df63abda.jpg)
![20210423_000455.jpg 20210423_000455.jpg](https://endless-sphere.com/sphere/data/attachments/164/164583-80764933d76a1e8f9ec8ad27a6b0ec3c.jpg)
I intend to make the design parametric so I can size it to any downtube. I'm also considering whether to sell them online, but will likely provide a few common configurations of the STL file for free on thingiverse.
Instead I came up with this little doodad that allowed me to connect a straight battery mount to a curved surface with hose clamps.
See photos below for the rough build progression:
![20210422_222610.jpg 20210422_222610.jpg](https://endless-sphere.com/sphere/data/attachments/164/164569-a6ab81f3b2305dc831bd8881c8718ab0.jpg)
![20210422_225454.jpg 20210422_225454.jpg](https://endless-sphere.com/sphere/data/attachments/164/164576-c5ab2352ec7b31e9f9993f507576dee3.jpg)
![20210422_222652.jpg 20210422_222652.jpg](https://endless-sphere.com/sphere/data/attachments/164/164570-339a641faa14567977f7ac72b8118364.jpg)
![20210422_222726.jpg 20210422_222726.jpg](https://endless-sphere.com/sphere/data/attachments/164/164571-a987b4d9e09c2287aa8d9adf5fcc0314.jpg)
![20210422_223212.jpg 20210422_223212.jpg](https://endless-sphere.com/sphere/data/attachments/164/164572-61af0dc94ad35aa0c92a7ab5dbf30a5f.jpg)
![20210422_223415.jpg 20210422_223415.jpg](https://endless-sphere.com/sphere/data/attachments/164/164573-f63f8ea4b1e731f97785fc734d2938fd.jpg)
![20210422_223449.jpg 20210422_223449.jpg](https://endless-sphere.com/sphere/data/attachments/164/164574-7f25032d0387efe6d93c86934059d889.jpg)
![20210422_223555.jpg 20210422_223555.jpg](https://endless-sphere.com/sphere/data/attachments/164/164575-66991b593c2016cb408582e4131e12e9.jpg)
![20210422_225830.jpg 20210422_225830.jpg](https://endless-sphere.com/sphere/data/attachments/164/164577-6331a6f6afb1f66466a354d389961496.jpg)
![20210422_233034.jpg 20210422_233034.jpg](https://endless-sphere.com/sphere/data/attachments/164/164578-78a00563b956385dc665e71e8f3f5263.jpg)
![20210422_233050.jpg 20210422_233050.jpg](https://endless-sphere.com/sphere/data/attachments/164/164579-6e65562826ce9c848ff36b1fa3b5013e.jpg)
![20210422_233806.jpg 20210422_233806.jpg](https://endless-sphere.com/sphere/data/attachments/164/164580-3ea07f5f92192c690db3465a97a13aa5.jpg)
![20210422_234130.jpg 20210422_234130.jpg](https://endless-sphere.com/sphere/data/attachments/164/164581-b919fb71a3681811037a2a5ff05db49e.jpg)
![20210422_234624.jpg 20210422_234624.jpg](https://endless-sphere.com/sphere/data/attachments/164/164582-e83229a9c6862ce92d785d14df63abda.jpg)
![20210423_000455.jpg 20210423_000455.jpg](https://endless-sphere.com/sphere/data/attachments/164/164583-80764933d76a1e8f9ec8ad27a6b0ec3c.jpg)
I intend to make the design parametric so I can size it to any downtube. I'm also considering whether to sell them online, but will likely provide a few common configurations of the STL file for free on thingiverse.