A2B Motor convert to external controller

Joined
Sep 1, 2021
Messages
105
looked at all post about A2b converting to external controller and for some reason, it doesn't show any pictures of how or where to connect the phase wires or hall sensor wires. looking for a quick detailed or two pictures of how to wire the motor for external controller. like a picture inside the motor with all wires soldered to the correct/corresponding points inside the motor.

like i said i did search and found nice pictures of people showing how to open the motor, but when came time to wire in the phase and Hall sensor wires, couldn't come up with anything because the pictures won't load or show no matter how many times i refresh the page. tried saving the pictures but still nothing.

link to what i search for and looked and read all 3 pages of them :
https://endless-sphere.com/forums/search.php?st=0&sk=t&sd=d&sr=topics&keywords=a2b&sf=titleonly

Picture of bike I'm trying to convert to a 48v ebike 245137451_4354521281322551_4865073973983840728_n[1].jpg
 
if i go sensor less, is the Phase wires easy to find and hook up?
 
Back
Top