I recently bought two NuVinci N171 hubs, from Calfee Designs, and now need the disc brake adapters, or at least one, for my latest build.
I can make it but I'd rather just buy the adapter with the rubber seal and cup washer and use my "machine time" making other bits, IF I can buy the original stuff.
I've tried high and low, east and west and haven't come up with anything other than some amusing scammers -
https://www.fitsakisv.top/index.php?main_page=product_info&products_id=16523
The only thing the site above provides is a reasonably accurate pic of what I need.
TIA for any and all leads on solving this problem.
I can make it but I'd rather just buy the adapter with the rubber seal and cup washer and use my "machine time" making other bits, IF I can buy the original stuff.
I've tried high and low, east and west and haven't come up with anything other than some amusing scammers -
https://www.fitsakisv.top/index.php?main_page=product_info&products_id=16523
The only thing the site above provides is a reasonably accurate pic of what I need.
TIA for any and all leads on solving this problem.