Dacflyer
1 W
I have acquired an Xtremegreen Sentinel PMV ( Police Mobility Vehicle )
This is a 3 wheeled stand up scooter. was sold mostly to Police and security departments.
It's unique looking, sort of a cross between a Segway and stealth fighter.
The unit is still in great condition, except the white panels are turning nicotine yellow with age.
It has all the police garb on it, lights and sirens and all.
I was going to buy it just for the battery pack, but the guy decided to just sell me the while thing.
this unit has 1 issue.. The Hub motor is probably trashed.. it was all apart, the guy stated that it had a grinding noise.
this was caused by 1 failed magnet.
So, I have a few questions maybe someone can help me out. i have spent several hours already crawling around the internet, to no avail yet on finding a way to fix this hub motor or to find a replacement.
The hub motor ( no idea on wattage size 5kw i think ) the motor is fork mounted front wheel, but it has a bolt on golf cart wheel..
the wheel bolts onto the hub.
1- I can't find such a style , Can someone help me find something suitable for replacement ? I have a lot of data on the wheel sizes etc. The wheel is a wide golf cart tire , 10" between the forks,
2- Does anyone on here repair them ?
3- can replacement magnets be bought ? And recommended glue or epoxy
4- does anyone sell replacement cables that goto the motor ? This has 3x 10Ga teflon coated wires,very thin jacketed wires. and 5x small hall sensor wires all in 1 cable..
ok,, this should be enough for now.. If this should be in a different thread, please advise.
Thanks..
This is a 3 wheeled stand up scooter. was sold mostly to Police and security departments.
It's unique looking, sort of a cross between a Segway and stealth fighter.
The unit is still in great condition, except the white panels are turning nicotine yellow with age.
It has all the police garb on it, lights and sirens and all.
I was going to buy it just for the battery pack, but the guy decided to just sell me the while thing.
this unit has 1 issue.. The Hub motor is probably trashed.. it was all apart, the guy stated that it had a grinding noise.
this was caused by 1 failed magnet.
So, I have a few questions maybe someone can help me out. i have spent several hours already crawling around the internet, to no avail yet on finding a way to fix this hub motor or to find a replacement.
The hub motor ( no idea on wattage size 5kw i think ) the motor is fork mounted front wheel, but it has a bolt on golf cart wheel..
the wheel bolts onto the hub.
1- I can't find such a style , Can someone help me find something suitable for replacement ? I have a lot of data on the wheel sizes etc. The wheel is a wide golf cart tire , 10" between the forks,
2- Does anyone on here repair them ?
3- can replacement magnets be bought ? And recommended glue or epoxy
4- does anyone sell replacement cables that goto the motor ? This has 3x 10Ga teflon coated wires,very thin jacketed wires. and 5x small hall sensor wires all in 1 cable..
ok,, this should be enough for now.. If this should be in a different thread, please advise.
Thanks..