Anybody try the hub motor kit from Yose Power?

eecsflyer · May 3, 2022

Seems like a pretty solid kit. For $500 you get a hub motor kit and battery with integrated controller.

https://yosepowershop.com/collections/e-bike-kit/products/e-bike-conversion-kit-48v-500w-26-rear-motor-fit-for-freewheel-with-48v13ah-down-tube-lithium-ion-battery-and-charger

They even send you the tools to swap out your cassette.

Anybody try installing one of their kits?

If not, maybe any experience with their hub motor from Aikema or AKM? I think the kit has this one, https://www.aikema.com.cn/en/product/product-54-377.html

999zip999 · May 3, 2022

Looks good sounds good what's the exact battery cell they use and tell him don't say proprietary because that just means cheap Chinese clone cells. And say that went you talk to them

Chalo · May 3, 2022

Their batteries are hokey and unreliable. If you want a hokey and unreliable motor kit, proceed.

Me, I'd buy a Jump bike motor and a KT controller and a Battery Hookup pack and assemble my own kit.

sloth1 · Aug 31, 2022

I put this kit onto my old Raleigh racing bike. I've had it about a year now and have had no problems with the battery or controller. The range is pretty good and there has been no noticeable degradation from new.

I did have a problem with the display, which I opened up and discovered was a poorly soldered joint, it now works fine.

These kits are cheap and build quality is variable, also the controller is not repairable because it has been covered in a potting compound. If this fails then I will have difficulty replacing it because it cannot be purchased separately.

While I am happy overall with the Yose Power Kit, I will probably put my own kit together on the next conversion so that I can be in control of the individual elements.

YOSE POWER · Friday at 6:21 PM

sloth1 said:
I put this kit onto my old Raleigh racing bike. I've had it about a year now and have had no problems with the battery or controller. The range is pretty good and there has been no noticeable degradation from new.

I did have a problem with the display, which I opened up and discovered was a poorly soldered joint, it now works fine.

These kits are cheap and build quality is variable, also the controller is not repairable because it has been covered in a potting compound. If this fails then I will have difficulty replacing it because it cannot be purchased separately.

While I am happy overall with the Yose Power Kit, I will probably put my own kit together on the next conversion so that I can be in control of the individual elements.

Hi, thank you for sharing your feedback. Your feedback is valuable to us as we strive to continuously improve our products. If you have any questions or suggestions in the future, please do not hesitate to contact us at service@yosepower.com. Thank you once again for your understanding and support.

YOSE POWER · Friday at 6:44 PM

Chalo said:
Their batteries are hokey and unreliable. If you want a hokey and unreliable motor kit, proceed.

Me, I'd buy a Jump bike motor and a KT controller and a Battery Hookup pack and assemble my own kit.

Hi, we understand your preference for assembling your own kit with components from different sources. We also have received positive feedback from many customers who have been satisfied with the performance and reliability of our products. If you have any further concerns or if there is anything we can assist you with, please do not hesitate to reach out to us at service@yosepower.com. Thank you very much.

Anybody try the hub motor kit from Yose Power?

eecsflyer

10 mW

999zip999

100 TW

Chalo

100 TW

sloth1

1 µW

YOSE POWER

1 µW

YOSE POWER

1 µW

Similar threads