Maximize0987
10 µW
- Joined
- Mar 9, 2022
- Messages
- 6
hello. I have a bbshd bike with a gearsensor.com gear sensor. I have read that it disconnects power for a very short time (3 millis). I am looking for input in how to make a simple modification that will hold it low for an additional amount of time like 1/2 or 1 second for example.
If I needed to hold it high I would try capacitors.
without a super simple solution I am thinking of using an ATTINY85 and coding it to pull low when input pin goes low the when input goes high wait for 500 millis (example) then flip output to high.
Come to think of it this is a simple solution for me, but looking for input.
THANKS!!!!
If I needed to hold it high I would try capacitors.
without a super simple solution I am thinking of using an ATTINY85 and coding it to pull low when input pin goes low the when input goes high wait for 500 millis (example) then flip output to high.
Come to think of it this is a simple solution for me, but looking for input.
THANKS!!!!