icecube57
10 MW
Im a long time member and builder and I recently decided to try to put some of my knowledge and opinions in audio form and create podcast that you can listen to when you are on you way to work.. on break.. in the background while working on projects. Some of them are short some of them are long. Some have a lot of indepth information, full of fact, and a lot of opinion. I started out talking to myself on various topics and now I'm getting a few long time members on board as guest to talk and bounce conversation off of and get some information on member projects and any associated businesses. The more casts I do the better the production value with be. But for right now is pretty much off the cuff and as scripted as I try to be it's not, no fluff, no bullshit, I tell it like it is. In the cast I know I say Im trying to keep them short but you just cant sometimes because the information and conversation cant be condensed. I may try to split into smaller segments and let you download or play part A- B- C and so on... Give me ideas and Ill try to do my best to step my game up and production quality. Im not a great speaker but over time I'm learning to get rid of the awkward pauses as I speak. Its more prominent when I'm talking to myself vs other people so please don't but my balls on that.=P
This is a my One Drive link so you can download the episodes.
http://1drv.ms/1Ei74zF
Or you can stream through youtube.
Episode #1 https://www.youtube.com/watch?v=4Xj-tcyJWsI
This video touches on The CA V3 Cycle Analyst Thermal Throttling Feature, Motor Windings, Efficiency, Terrain, Voltage, Controller, and more. Introduction on what 's to come for the future of this podcast.
Episode #2 https://www.youtube.com/watch?v=lM0zasTArLo
This lightly touches the different types of lithium chemistry. I talk about their place in EV applications, their capabilities, pros and cons, the major vendors and manufacturers of the chemistry. This is far from complete and definitely will be revisited.
Episode #3 https://www.youtube.com/watch?v=jat0F83ySnI
This podcast goes over high current connectors used on ebikes.
Episode #4 https://www.youtube.com/watch?v=NciW3xzDNRc
Discusses how much power is really needed. Could to much power cause you to waste power and overheat your motor unnecessarily? What I've done to keep the performance, handling, and temps in check for quality riding.
Episode #5 https://www.youtube.com/watch?v=p3NlubmKgWU
Tips about building packs with HK Lipo. How to do a warranty claim without return. Unboxing.. initial voltage check, capacity checking. BMS vs Balance charging and why its important to check capacity for either scenario.
Episode #6 https://www.youtube.com/watch?v=aoyAYJ7hmKQ
I talk about how to get longevity out of batteries, controllers and motors. Is your controller to small or two big for your motor? Are you feeding it unnecessary power. Is your battery pack to small?
Episode #7 https://www.youtube.com/watch?v=VbaQaV5H1ZM
Guest Caller Shaun Jame at http://www.koolbyke.com
Episode #8 https://www.youtube.com/watch?v=CvDEhDE4QXc
I sat down and had a very lengthy conversation with AlanB on the Endless Sphere forum where we discussed his project bike which is/was the Croborg.
Episode #9 is https://www.youtube.com/watch?v=UYPz1TueP9s
Spoke with Alan Hu or better known as Evolutiongts. We talked about his race bike project, Sabvoton controllers, Mongoose Mini Moto Conversion, the future of EV vehicles, and vaporware dream projects.
Episode # 10 https://www.youtube.com/watch?=YaNqkoOfE4k
Talked to Rafe Husain the owner of Calibike. We talked about his company, quality control of chinese vendors, his 40lbs 40mph 40 bike, his plans for a 30lbs 30mph 30 bikes and different ways to come to those specs. We talked briefly on the Toyota Prius and my Chevy Volt. Briefly touched on bafang motors, chainline and freewheels. A nice mixed bag.
Episode # 11 https://www.youtube.com/watch?v=beo6kh1u1OI
This cast is an interview with Gary Salo at Golden Motor Canada. We go over his product line up, quality improvement over the years, customer service interactions, ebike safety and many other points.
Episode # 12 https://www.youtube.com/watch?v=Sy-KI4VGlv4
Guest Caller Barent Hoffman from Kinaye Motor Sports. http://www.kinayems.com We speak on the MXUS 3000w Motor and several of his projects.
Episode # 13 https://www.youtube.com/watch?v=xtL12LoG6hU
This cast is with guest caller Jay AKA Hyena on the ES Forums. We talk about the Flux Frame, Batteries, Motors, and Controllers. A nice healthy mix. Enjoy.
This is a my One Drive link so you can download the episodes.
http://1drv.ms/1Ei74zF
Or you can stream through youtube.
Episode #1 https://www.youtube.com/watch?v=4Xj-tcyJWsI
This video touches on The CA V3 Cycle Analyst Thermal Throttling Feature, Motor Windings, Efficiency, Terrain, Voltage, Controller, and more. Introduction on what 's to come for the future of this podcast.
Episode #2 https://www.youtube.com/watch?v=lM0zasTArLo
This lightly touches the different types of lithium chemistry. I talk about their place in EV applications, their capabilities, pros and cons, the major vendors and manufacturers of the chemistry. This is far from complete and definitely will be revisited.
Episode #3 https://www.youtube.com/watch?v=jat0F83ySnI
This podcast goes over high current connectors used on ebikes.
Episode #4 https://www.youtube.com/watch?v=NciW3xzDNRc
Discusses how much power is really needed. Could to much power cause you to waste power and overheat your motor unnecessarily? What I've done to keep the performance, handling, and temps in check for quality riding.
Episode #5 https://www.youtube.com/watch?v=p3NlubmKgWU
Tips about building packs with HK Lipo. How to do a warranty claim without return. Unboxing.. initial voltage check, capacity checking. BMS vs Balance charging and why its important to check capacity for either scenario.
Episode #6 https://www.youtube.com/watch?v=aoyAYJ7hmKQ
I talk about how to get longevity out of batteries, controllers and motors. Is your controller to small or two big for your motor? Are you feeding it unnecessary power. Is your battery pack to small?
Episode #7 https://www.youtube.com/watch?v=VbaQaV5H1ZM
Guest Caller Shaun Jame at http://www.koolbyke.com
Episode #8 https://www.youtube.com/watch?v=CvDEhDE4QXc
I sat down and had a very lengthy conversation with AlanB on the Endless Sphere forum where we discussed his project bike which is/was the Croborg.
Episode #9 is https://www.youtube.com/watch?v=UYPz1TueP9s
Spoke with Alan Hu or better known as Evolutiongts. We talked about his race bike project, Sabvoton controllers, Mongoose Mini Moto Conversion, the future of EV vehicles, and vaporware dream projects.
Episode # 10 https://www.youtube.com/watch?=YaNqkoOfE4k
Talked to Rafe Husain the owner of Calibike. We talked about his company, quality control of chinese vendors, his 40lbs 40mph 40 bike, his plans for a 30lbs 30mph 30 bikes and different ways to come to those specs. We talked briefly on the Toyota Prius and my Chevy Volt. Briefly touched on bafang motors, chainline and freewheels. A nice mixed bag.
Episode # 11 https://www.youtube.com/watch?v=beo6kh1u1OI
This cast is an interview with Gary Salo at Golden Motor Canada. We go over his product line up, quality improvement over the years, customer service interactions, ebike safety and many other points.
Episode # 12 https://www.youtube.com/watch?v=Sy-KI4VGlv4
Guest Caller Barent Hoffman from Kinaye Motor Sports. http://www.kinayems.com We speak on the MXUS 3000w Motor and several of his projects.
Episode # 13 https://www.youtube.com/watch?v=xtL12LoG6hU
This cast is with guest caller Jay AKA Hyena on the ES Forums. We talk about the Flux Frame, Batteries, Motors, and Controllers. A nice healthy mix. Enjoy.