Doctorbass
100 GW
I got this idea of bulding an second ebike for the friends that will come visiting me in Quebec!
That is always a pleasure to meet you guys when you come to Quebec! That is cool to see you enjoying my Ebike... but...
Enjoying ebike is so much more fun when 2+ !! witch happen to me like 1% of time :lol:
So for everyone of you guys that will come in Quebec to meet me, YOU WILL HAVE A BIKE TO RUN WITH ME!! 8) :wink:
To have matched fun, that second ebike will be very similar to my actual NYX.
-NYX 2016 frame ( blue color aluminum)
-Adaptto MAX-E 14kW unlocked
-QS205 50H 4T with all Doc modifications including Ferrofluid
-20s15P of 25R and VTC5
-Dual 9" 224mm disk brake
-60T crankset
-Marzocchi suspensions
-shimano XT 4 pistons brake
-1.8kW ultracompact charger
-Maybe an integrated J1772 plug!... for longer run than 2.5kWh :wink:
-2.5 x 17 Sinko rear and 24x3.0 front tires
Actually i have to build the battery pack from couple Makita 5Ah pack,
-finish the motor upgrade ( varnisg, FF, heatsink etc)
-Modify the Adaptto Max-e with better caps, power wires and unlock it
-find a new 20 x 160mm axel for my World cup double crown fork
-measure magnet strengh with my future gaussmeter that is actually in the mail. ( I want to compare with another original motor magnet rotor to see if after baking the paint at 78 celsius have made magnet loss magnetism)
Pics coming soon
Any future progress will be posted as well!
For comparison my actual E-bike is configures as this ( 2WD temporarely removed for better offroad !).. It is in an area where not less than 13 closed loop camera are recording every angle
Doc
That is always a pleasure to meet you guys when you come to Quebec! That is cool to see you enjoying my Ebike... but...
Enjoying ebike is so much more fun when 2+ !! witch happen to me like 1% of time :lol:
So for everyone of you guys that will come in Quebec to meet me, YOU WILL HAVE A BIKE TO RUN WITH ME!! 8) :wink:
To have matched fun, that second ebike will be very similar to my actual NYX.
-NYX 2016 frame ( blue color aluminum)
-Adaptto MAX-E 14kW unlocked
-QS205 50H 4T with all Doc modifications including Ferrofluid
-20s15P of 25R and VTC5
-Dual 9" 224mm disk brake
-60T crankset
-Marzocchi suspensions
-shimano XT 4 pistons brake
-1.8kW ultracompact charger
-Maybe an integrated J1772 plug!... for longer run than 2.5kWh :wink:
-2.5 x 17 Sinko rear and 24x3.0 front tires
Actually i have to build the battery pack from couple Makita 5Ah pack,
-finish the motor upgrade ( varnisg, FF, heatsink etc)
-Modify the Adaptto Max-e with better caps, power wires and unlock it
-find a new 20 x 160mm axel for my World cup double crown fork
-measure magnet strengh with my future gaussmeter that is actually in the mail. ( I want to compare with another original motor magnet rotor to see if after baking the paint at 78 celsius have made magnet loss magnetism)
Pics coming soon
Any future progress will be posted as well!
For comparison my actual E-bike is configures as this ( 2WD temporarely removed for better offroad !).. It is in an area where not less than 13 closed loop camera are recording every angle
Doc