Can someone help me find this connector

Offroader

1 MW
Joined
Sep 8, 2013
Messages
2,630
Location
USA
This is used on the Sur-Ron bike to connect the 3 wire halls.

This is the only picture I can find of the connector and wanted to see if I could find a match before dismantling my bike.

If anyone has any idea or an idea on how I can search for it.

Trying not to have to splice into wires.

Thanks.

VFyNwRL.png


Here is the video which describes the throttle if interested.

https://youtu.be/Lw1mLYKVxaY?t=332
 
Looks like a 3 wire weatherproof connector. However you should probably give us pictures of yours, front back and the inside of both halves once disconnected.

:D :bolt:
 
Offroader said:
This is used on the Sur-Ron bike to connect the 3 wire halls. This is the only picture I can find of the connector and wanted to see if I could find a match before dismantling my bike. If anyone has any idea or an idea on how I can search for it. Trying not to have to splice into wires. Thanks.
https://i.imgur.com/VFyNwRL.png
Here is the video which describes the throttle if interested.
https://youtu.be/Lw1mLYKVxaY?t=332
Offroader,

That is a standard automotive electrical connector, of the weatherproof variety. Any good auto parts clerk should be able to match what you have there, with maybe six inch (15cm) pigtail wires installed, whether the connector you need is male or female.
 
For a vehicle that would be exposed to the weather, I'd get a male-female Delphi "Weatherpack" connector set from a boat parts supply. You can get them with almost any pin-count.

0000654_weather-pack-3-pin_600_1.jpeg
 
yes I did plenty of searching, it must be some rare connector they use over in china. Was hoping maybe someone happened to run across something like this.

I'll just put on a new weatherproof connector.

Thanks for the help and advice.
 
Looked to me like the normal superseal. I only just noticed the slight asymmetry in your photo.
Yep, probably not worth chasing that random connector.
 
Back
Top