eddiebigmouth
1 µW
- Joined
- Mar 3, 2020
- Messages
- 1
Hello all,
I am working with two Sevcon HVLP controllers - HVLP10 (air cooled) and HVLP 20 (water cooled).
I already have the required software/hardware to program these inverters but there are some issues.
In the DVT software, Helper section, the local I/Os cannot be configured for both controllers while the TPDOs and RPDOs tab does not work with the HVLP20. Also, I need to figure out how can I control the main and precharge contactors with the same.(attached screenshots)
Any help is appreciated.
This is a list of all hardware/software that I have:
1. Ixxat can compact usb to CAN adapter
2. Sevcon DVT software
I am working with two Sevcon HVLP controllers - HVLP10 (air cooled) and HVLP 20 (water cooled).
I already have the required software/hardware to program these inverters but there are some issues.
In the DVT software, Helper section, the local I/Os cannot be configured for both controllers while the TPDOs and RPDOs tab does not work with the HVLP20. Also, I need to figure out how can I control the main and precharge contactors with the same.(attached screenshots)
Any help is appreciated.
This is a list of all hardware/software that I have:
1. Ixxat can compact usb to CAN adapter
2. Sevcon DVT software