Useable Displays/Analysts for Sabvoton 72150 controller

Hello EV friends,
i decided to get a unlocked sabvoton 72150 controller with a qs 205 motor and a 20s battery.
I'd like to have all important information like temp., amps, "exact" speed in kph ect. and i also want to use a PAS. I would also use my phone as a display if there is a good solution available.
How do i know what types of displays i can use ?
Do you have any recommendations?
Is the cycle analyst v2 a normal display or is that something differrnt ? The c.a. v2 seems to offer lots of information but has a quiete confusing old fashioned display i think..like a old calculator :lol:

And btw. a colordisplay would be cool but is not the most important thing for me

No replies ? No one any ideas ? Or maybe this question was already asked to often ? Well i haven't found a good summery.
I would also be really thankful if someone would just leave me just a link to a topic or informative website
Thanks

Im going to assume you don't want this http://www.sabvoton.net/lcd/H6-TFT-LCD-Display.html, so you'll have to figure out your own system to collect and display information using an arduino to interpret UART/CAN messages and displaying them on a 6" LCD screen.

itsrow said:

Im going to assume you don't want this http://www.sabvoton.net/lcd/H6-TFT-LCD-Display.html, so you'll have to figure out your own system to collect and display information using an arduino to interpret UART/CAN messages and displaying them on a 6" LCD screen.

Click to expand...

Thanks for your reply istrow,
as you already assumed right, i don't want one of the two "original" ones because i also wan't information like watt, amps, temperature ect. I saw that many power e bikes have the cycle analyst v2, but i'm not sure if this counts as a normal display or if this is something special. And i'd also prefer a color display if possible

I don't know what your installation looks like, but If you're willing to change battery management systems I believe the ANT BMS has an LCD screen (unfortunately b&w) but it would output watts, speed, amps, just not temperature unfortunately seehttps://ae01.alicdn.com/kf/HTB1rFmXaynrK1RjSsziq6xptpXaz.jpg). However if you want speed, watts, amps, temperature of motor/controller you'd probably have to make your own display. The cycle analyst is a perfectly acceptable display but the graphics look like theyre from the 1980's and aren't complimenting to sportier looking bikes. Also with the cycle analyst you get control of your throttle max/min voltages, ramping time, couple other features I can't remember off the top of my head.