Hi folks,
Got a KBS72181AE and wired both throttle and brake with 0-5v (without switches) and can't seem to get the Variable Regen braking to work.
I have tested the brake lever with the throttle wiring and i know the brake lever works.
I tried with the "Releasing Throttle Starts Regen" mode and i can see regen working.
I even swapped the no.2 wire (Brake AN) to the no.13 wire (Brake Switch) just to see whether there is manufacturing defect but still not working.
On the config program, I have both 'Brake Switch' and 'Release throttle starts regen' turned off and have tried practically all the start and stop sliders in different locations, but still no luck.
I have tried every single possible setting as well trying out all the different sensor types.
On an older post some has said the brake switch needs to be installed but not the newer ones (bought mine 5 months ago). There is no mention that installing a switch is a must in the manuals and FAQs of the website, so Im guessing this is not required.
Am I missing something here?
Thanks for reading
Got a KBS72181AE and wired both throttle and brake with 0-5v (without switches) and can't seem to get the Variable Regen braking to work.
I have tested the brake lever with the throttle wiring and i know the brake lever works.
I tried with the "Releasing Throttle Starts Regen" mode and i can see regen working.
I even swapped the no.2 wire (Brake AN) to the no.13 wire (Brake Switch) just to see whether there is manufacturing defect but still not working.
On the config program, I have both 'Brake Switch' and 'Release throttle starts regen' turned off and have tried practically all the start and stop sliders in different locations, but still no luck.
I have tried every single possible setting as well trying out all the different sensor types.
On an older post some has said the brake switch needs to be installed but not the newer ones (bought mine 5 months ago). There is no mention that installing a switch is a must in the manuals and FAQs of the website, so Im guessing this is not required.
Am I missing something here?
Thanks for reading