hallkbrdz
100 W
A video sparked my interest in converting an alternator into a PM 3-phase motor. My son-in-law had a Ford Freestar that I obtained the alternator from, but that Motorcraft part has been a PITA to disassemble. Separating the cases was near impossible, and I resorted to using the gear puller on the wide case, pulling the stator wires from the diode board in the process (sort of nice!). While the one in the video popped off easy with a screwdriver, I'm still fighting to get the rotor conduction ring off this one, and have ordered a small two-arm puller just for that.
Given that - what fairly modern alternators that I could find in fair numbers at say, LKQ, that are good candidates for easy disassembly and conversion to 1.5ish kW motors.
Cheers
Given that - what fairly modern alternators that I could find in fair numbers at say, LKQ, that are good candidates for easy disassembly and conversion to 1.5ish kW motors.
Cheers