help, emax hub motor with damaged wire harness.

Electric Motors and Controllers
Post Reply
dexdrako   10 µW

10 µW
Posts: 6
Joined: Oct 16 2021 7:05pm

help, emax hub motor with damaged wire harness.

Post by dexdrako » Jan 22 2022 5:13pm

so I bought a 72 4000W emax/proud eagle hub motor and the wiring harness was damaged in shipping. i was wondering if anyone can point me in the right direction how to replace the harness i would be grateful

SlowCo   10 MW

10 MW
Posts: 2111
Joined: Jan 05 2015 5:43pm
Location: The Netherlands

Re: help, emax hub motor with damaged wire harness.

Post by SlowCo » Jan 22 2022 6:09pm

Post photos of the damage for users here to see what can be done.

dexdrako   10 µW

10 µW
Posts: 6
Joined: Oct 16 2021 7:05pm

Re: help, emax hub motor with damaged wire harness.

Post by dexdrako » Jan 22 2022 6:40pm

https://imgur.com/DM9OVtv
https://imgur.com/CqL6CTR
as you can see at least one wire was cut and i cant tell how damaged the rest are

SlowCo   10 MW

10 MW
Posts: 2111
Joined: Jan 05 2015 5:43pm
Location: The Netherlands

Re: help, emax hub motor with damaged wire harness.

Post by SlowCo » Jan 23 2022 2:10pm

I would VERY carefully peel/cut away the outer black insulation up to where it enters the axle. Repair the broken and damaged wires and insulate it again.

Post Reply