Are there differences in Hall degree between a PMSM and IPM motor, both are 5 pole
Z Zerox 100 µW Joined Dec 19, 2011 Messages 8 Jul 5, 2022 #1 Are there differences in Hall degree between a PMSM and IPM motor, both are 5 pole
liveforphysics 100 TW Joined Oct 28, 2008 Messages 14,539 Location Manhattan Beach, CA, USA Jul 5, 2022 #2 If the stators termination didn't change from Wye to Delta (which means the ideal hall location shifts by a few degrees), then your stator hall location should be the same with IPM or SPM rotors.
If the stators termination didn't change from Wye to Delta (which means the ideal hall location shifts by a few degrees), then your stator hall location should be the same with IPM or SPM rotors.
Z Zerox 100 µW Joined Dec 19, 2011 Messages 8 Jul 6, 2022 #3 Thanks Luke, I wasn't sure when I bought a Sur ron tuned asi off the internet, I'm gonna try n run one of Mikes (L rods) XL motors with it......
Thanks Luke, I wasn't sure when I bought a Sur ron tuned asi off the internet, I'm gonna try n run one of Mikes (L rods) XL motors with it......