Bluefang
10 kW
Hey all, I have started buying a bunch of Goldenmotor items to play around with a just generally test out because i think they have the potential to do a lot better then they currently are speced for and are been used for with some simple modifications. One of the main things i have been looking at is their higher voltage controllers that go up to 120V and 40kw+ for the biggest controller. Also bought enough to get dealer pricing so thats a bonus.
I have a VEC200, VEC500 and a pair of VEC700 in my possession to test out and use as stock on a few projects. I have pulled apart the VEC500 as it was the easiest to dismantle and the simple trick i was doing with my earlier Sabvoton controllers on my motorbike does not look like it will be possible. That simple trick involved just running a parallel wire to phase wire that was going thru the hall sensor around the outside. Simple and effectively took the controllers from 10kw max to 15kw by only showing the hall sensor a portion of the phase current.
My question with the Goldenmotor controllers is does anyone have any suggestions on how to get some wire out past the massive posts? Would they be possible to unscrew, i have never seen that type so i dont know how they would have been mounted. It looks like they could be unscrewed and then i would just have to run 4x 8awg wires out, 2 from outside the hall ring and 2 from inside. The control board cannot be removed with out desoldering ~20 connections.
I have a VEC200, VEC500 and a pair of VEC700 in my possession to test out and use as stock on a few projects. I have pulled apart the VEC500 as it was the easiest to dismantle and the simple trick i was doing with my earlier Sabvoton controllers on my motorbike does not look like it will be possible. That simple trick involved just running a parallel wire to phase wire that was going thru the hall sensor around the outside. Simple and effectively took the controllers from 10kw max to 15kw by only showing the hall sensor a portion of the phase current.
My question with the Goldenmotor controllers is does anyone have any suggestions on how to get some wire out past the massive posts? Would they be possible to unscrew, i have never seen that type so i dont know how they would have been mounted. It looks like they could be unscrewed and then i would just have to run 4x 8awg wires out, 2 from outside the hall ring and 2 from inside. The control board cannot be removed with out desoldering ~20 connections.