Display for chinese controller

Hi all,

I repaired a scooter with a controller that we had for 2 years at my work. It's a 72V 1200w controller, as this one:
https://fr.aliexpress.com/item/72V-1200W-Controller-for-Brushless-Motor-3-Phase-Line-Sensor-controlador-E-bike-Electric-Bike-Bicycle/32754512978.html?spm=a2g0w.10010108.1000016.1.391629c9MUVJkb&isOrigTitle=true

Do you know which display I could use with this kind of controller to get the speed and the battery level?

Thanks in advance for your help

Didier

Looks like a KT Controller: https://bmsbattery.com/ebike-kit/721-s12sn-1000w-40a-torque-simulation-sine-wave-controller-ebike-kit.html
That can fit the S-LCDs from BMS Battery:https://bmsbattery.com/88-meterdisplay

It looks like, but it isn't On the one from bmsbattery, there is an output for a display (called meter). But here we don't have any. The only signals I could get are:

Instrument: Thin Green(Instrument signal)

Speed : Thin Brown(Low Speed signal)/Thin Black(Speed Signal input)/Thin Blue(High Speed Signal)

I'm a bit lost, and I get no answer from the shop...

Anyone can help regard about motor brushless dc from chinazipu.i try contact them,nobody answer. Pls anyone know to replace motor brushless from nakto electric bike