Mid drive frame n motor

Joined
Apr 25, 2014
Messages
2,782
Location
Sausalito
I had this made and now selling it hoping to get another made with horizontal dropouts to make chain tensioning integrated. U could add a chain tensioner (I have) on the rear derailleur hanger and there’s an extension available. Welding/gluing a nut on the bb shell was my plan and tensioning there.

Comes w the motor which is this:
https://www.antinnotech.com/collections/frontpage/products/ant-innovation-at-83100-9-5kw-brushless-motor-with-watercooling-system-for-electric-jetboard-sensored-outrunner-bldc-motor .. but I got it in parts and I added another hub which uses much bigger bearings. It needs to be wound and can do whatever kv u want.
Uses freewheeling crankset as jackshaft.

I have all the mechanical parts needed except the belt. I have all the standard bike parts as as well.


Open to offers. Would rather not ship and live in Cali Bay Area.
 

Attachments

  • 5B264A9D-68DB-4B21-8927-004E31F09881.jpeg
    5B264A9D-68DB-4B21-8927-004E31F09881.jpeg
    3.8 MB · Views: 622
  • 721780E0-5129-4C1D-9AB9-A8FA2CC5226C.jpeg
    721780E0-5129-4C1D-9AB9-A8FA2CC5226C.jpeg
    3.6 MB · Views: 622
  • 516A0503-DCCF-4C8A-B35A-C7B2E2189BC8.jpeg
    516A0503-DCCF-4C8A-B35A-C7B2E2189BC8.jpeg
    3.9 MB · Views: 622
  • 439A5A1E-A9BB-43BD-A08B-A04FDAA5BA1D.jpeg
    439A5A1E-A9BB-43BD-A08B-A04FDAA5BA1D.jpeg
    3.6 MB · Views: 621
  • 15293C07-F544-4805-A4BE-CFFCE4CECFC1.jpeg
    15293C07-F544-4805-A4BE-CFFCE4CECFC1.jpeg
    514.3 KB · Views: 621
  • 1A4C30C7-D01D-4002-8CEF-6376D6F9D771.jpeg
    1A4C30C7-D01D-4002-8CEF-6376D6F9D771.jpeg
    3.8 MB · Views: 621
  • 18ECCFCA-3E11-448A-8684-93BB4135BDC1.jpeg
    18ECCFCA-3E11-448A-8684-93BB4135BDC1.jpeg
    514.1 KB · Views: 621
im very likely getting another of these frames made and the differences being:

horizontal dropouts and 120mm rear spacing for a fixed gear hub so can run a two-way throttle and regen
an extra seat tube in the middle of the triangle to attach batteries to
no braze-on cable guides and no rear brake mount

if anyone is in the bay area is interested in getting this new frame write me and we can split the shipping cost.


I think sadly will be easier to sell this frame in the pics above by cutting off the motor mount and replacing with a carbon tube and selling it as a regular bike frame. Or write me and will sell it cheap with the wheels, cog, pulleys, and freewheeling cranks with white industries freewheel drilled for the pulley. ( a big loss for me but I'm particular)
 
Back
Top