ntcdesigns
1 µW
- Joined
- Jul 6, 2022
- Messages
- 2
HI,
If you are looking to convert encoder to hall for the QS165 motor (or most motors), I have encoder converters that sit inline between the motor and controller. It uses an Raspberry Pi Pico MPU to track the angle and output the appropriate hall signals. You can adjust pole pairs, pulse per rev, etc via the usb port which has a menu driven interface. The picture shows the hall signal aligned with phase back emf.
If you are looking to convert encoder to hall for the QS165 motor (or most motors), I have encoder converters that sit inline between the motor and controller. It uses an Raspberry Pi Pico MPU to track the angle and output the appropriate hall signals. You can adjust pole pairs, pulse per rev, etc via the usb port which has a menu driven interface. The picture shows the hall signal aligned with phase back emf.