I like the design on the MX60, and just got one a bit run down but at a nice price.
At first sight, not bad.
View attachment 14
After going it over the scooter had mores issues then i first i thougt, i love the battery solution but it need to be rebuild. It holds 60,4V fully charged so thsts cost.
![711846DD-6E22-4202-8FBC-C09FA68F85EB.jpeg 711846DD-6E22-4202-8FBC-C09FA68F85EB.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184393-caa6d85e04ad20271e57eede6a4a7a0d.jpg)
And after couple of days i decided to do rebuild from ground and try some new electronics.
View attachment 13
![4325037E-AF8A-48E7-BDFD-5233FD555DA2.jpeg 4325037E-AF8A-48E7-BDFD-5233FD555DA2.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184396-8e916b1182f33d458826a676779bce19.jpg)
![77C4EB39-2583-4777-BDB8-4AF53F7770B0.jpeg 77C4EB39-2583-4777-BDB8-4AF53F7770B0.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184397-d98603853fe2e4cbb9178906357939ca.jpg)
Starting the rebuild with re wire the motors, has orginal 9 pin. No speed sensor just 5 hall wires and 3 new 12awg pahse wires
![D20D9A0F-7656-4C31-99CE-6F021D7F1A42.jpeg D20D9A0F-7656-4C31-99CE-6F021D7F1A42.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184499-85780ca7477134f45db029a8fe489e54.jpg)
![2681E505-626B-4E20-A1BC-50119623A197.jpeg 2681E505-626B-4E20-A1BC-50119623A197.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184500-e78cbeede5ee9aefe900d16f9a6d5cf4.jpg)
Strip it down and spray paintet the worst parts
![671F4359-8811-43DC-821E-9FF9523582AF.jpeg 671F4359-8811-43DC-821E-9FF9523582AF.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184842-389ab77e1fb55fc56d9516050f8d811f.jpg)
As i will use switches and light as orginal the only adition i need is eco/turbo switch![7DFF65F6-8761-47DE-99A7-83658065A1C8.jpeg 7DFF65F6-8761-47DE-99A7-83658065A1C8.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184843-dd8f38269643e3fd89b4f3fefaffa5ca.jpg)
Got the battery back, had to replace 8 cells
![06D4E51B-4AA7-4756-B30E-877ECF50BB3E.jpeg 06D4E51B-4AA7-4756-B30E-877ECF50BB3E.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184849-1589496a6084f5ed84c31c48fb48133f.jpg)
Rebuild is started
![0A9123DC-4171-42F3-8BB9-E1AF5F5B25C7.jpeg 0A9123DC-4171-42F3-8BB9-E1AF5F5B25C7.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184850-0e300951ed7ac37c384516324c03b17e.jpg)
As i wait for the controller kit it’s time for rewire and new connectors, had some jwpf that works great
![9F39CEF8-7FDE-4761-8F96-B5B9012A852B.jpeg 9F39CEF8-7FDE-4761-8F96-B5B9012A852B.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184851-065345995ae44a9707b744aa7f399bf1.jpg)
Installed a key switch that can be pulled out in both posisions![8AFC48FF-B3B2-408D-861B-A6EFC65A8C3D.jpeg 8AFC48FF-B3B2-408D-861B-A6EFC65A8C3D.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184852-a3ab3f4f2b2f235ba3acc0d5fe07994e.jpg)
Finaly the controller kit got delivered, not the best quality i think but have to test it![8D3B69F1-F744-4A6C-A70A-E9C9136DA048.jpeg 8D3B69F1-F744-4A6C-A70A-E9C9136DA048.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184875-6677a15a79358469b52aefd2e3948383.jpg)
Modify the connectors on the controller, and make a new end plate with separation.
![14811774-1C9B-402B-882D-5209ED42698B.jpeg 14811774-1C9B-402B-882D-5209ED42698B.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184876-17c08632ea1a9cd400e61fc004dd509b.jpg)
![85344A34-B5CF-4674-9F7C-0F66EE5AA5EE.jpeg 85344A34-B5CF-4674-9F7C-0F66EE5AA5EE.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184877-f4591122f152d46b57cff93b8ad33ef0.jpg)
At first sight, not bad.
View attachment 14
After going it over the scooter had mores issues then i first i thougt, i love the battery solution but it need to be rebuild. It holds 60,4V fully charged so thsts cost.
![711846DD-6E22-4202-8FBC-C09FA68F85EB.jpeg 711846DD-6E22-4202-8FBC-C09FA68F85EB.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184393-caa6d85e04ad20271e57eede6a4a7a0d.jpg)
And after couple of days i decided to do rebuild from ground and try some new electronics.
View attachment 13
![4325037E-AF8A-48E7-BDFD-5233FD555DA2.jpeg 4325037E-AF8A-48E7-BDFD-5233FD555DA2.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184396-8e916b1182f33d458826a676779bce19.jpg)
![77C4EB39-2583-4777-BDB8-4AF53F7770B0.jpeg 77C4EB39-2583-4777-BDB8-4AF53F7770B0.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184397-d98603853fe2e4cbb9178906357939ca.jpg)
Starting the rebuild with re wire the motors, has orginal 9 pin. No speed sensor just 5 hall wires and 3 new 12awg pahse wires
![D20D9A0F-7656-4C31-99CE-6F021D7F1A42.jpeg D20D9A0F-7656-4C31-99CE-6F021D7F1A42.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184499-85780ca7477134f45db029a8fe489e54.jpg)
![2681E505-626B-4E20-A1BC-50119623A197.jpeg 2681E505-626B-4E20-A1BC-50119623A197.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184500-e78cbeede5ee9aefe900d16f9a6d5cf4.jpg)
Strip it down and spray paintet the worst parts
![671F4359-8811-43DC-821E-9FF9523582AF.jpeg 671F4359-8811-43DC-821E-9FF9523582AF.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184842-389ab77e1fb55fc56d9516050f8d811f.jpg)
As i will use switches and light as orginal the only adition i need is eco/turbo switch
![7DFF65F6-8761-47DE-99A7-83658065A1C8.jpeg 7DFF65F6-8761-47DE-99A7-83658065A1C8.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184843-dd8f38269643e3fd89b4f3fefaffa5ca.jpg)
Got the battery back, had to replace 8 cells
![06D4E51B-4AA7-4756-B30E-877ECF50BB3E.jpeg 06D4E51B-4AA7-4756-B30E-877ECF50BB3E.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184849-1589496a6084f5ed84c31c48fb48133f.jpg)
Rebuild is started
![0A9123DC-4171-42F3-8BB9-E1AF5F5B25C7.jpeg 0A9123DC-4171-42F3-8BB9-E1AF5F5B25C7.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184850-0e300951ed7ac37c384516324c03b17e.jpg)
As i wait for the controller kit it’s time for rewire and new connectors, had some jwpf that works great
![9F39CEF8-7FDE-4761-8F96-B5B9012A852B.jpeg 9F39CEF8-7FDE-4761-8F96-B5B9012A852B.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184851-065345995ae44a9707b744aa7f399bf1.jpg)
Installed a key switch that can be pulled out in both posisions
![8AFC48FF-B3B2-408D-861B-A6EFC65A8C3D.jpeg 8AFC48FF-B3B2-408D-861B-A6EFC65A8C3D.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184852-a3ab3f4f2b2f235ba3acc0d5fe07994e.jpg)
Finaly the controller kit got delivered, not the best quality i think but have to test it
![8D3B69F1-F744-4A6C-A70A-E9C9136DA048.jpeg 8D3B69F1-F744-4A6C-A70A-E9C9136DA048.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184875-6677a15a79358469b52aefd2e3948383.jpg)
Modify the connectors on the controller, and make a new end plate with separation.
![14811774-1C9B-402B-882D-5209ED42698B.jpeg 14811774-1C9B-402B-882D-5209ED42698B.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184876-17c08632ea1a9cd400e61fc004dd509b.jpg)
![85344A34-B5CF-4674-9F7C-0F66EE5AA5EE.jpeg 85344A34-B5CF-4674-9F7C-0F66EE5AA5EE.jpeg](https://endless-sphere.com/sphere/data/attachments/184/184877-f4591122f152d46b57cff93b8ad33ef0.jpg)