vsett 10+ project

Amping

1 µW
Joined
Sep 28, 2022
Messages
4
Location
Auckland NZ
Hi everyone, just looking for some advice/cost effective ways to up the speed while keeping stock batteries (if its possible). Im rather new to all of this but have a decent enough understanding of how it all works. looking at getting some kind of vesc tool run controllers but hoping to house everything inside the original deck space keeping everything concealed. Any advice or suggestions are greatly appreciated. Hoping to reach 100 - 110 kmh. thanks :)
 
Best first recommendation is to look at the other Vsett posts/threads; there's a fair amount of info on them there that may help:

https://endless-sphere.com/forums/search.php?keywords=*vset*&terms=all&author=&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search
 
Why would you want to? Super 72 controller would make more sense.

If the 11+ controller pulls over 35A then you'll be a little quicker acceleration but the same top speed. You have the 28Ah battery?
 
You need more voltage (new or more batteries) for increased top speed. More amps from a controller would help acceleration but not much for top end.
 
https://www.tiktok.com/@thegreasesparky/video/7192836774383586562?is_from_webapp=1&sender_device=pc&web_id=7186853198107575809

got an 11 super, this is stock! would love some recommendations on mods that can push it over its current top speed witch is 118 kph!
 
Back
Top