tomerinbar1
1 µW
- Joined
- Jul 17, 2016
- Messages
- 2
Hello all,
My setup is:
NTM 50-60 270KV
6S 8Ah
VESC
I tried to configure the ESC via the BLDC Tool and all I get is a jitters startup and the board don't go forward.
Without load it's able to spin all the way with the throttle.
Also I didn't able to make the motor detection works..
What I miss?
Thank you
My setup is:
NTM 50-60 270KV
6S 8Ah
VESC
I tried to configure the ESC via the BLDC Tool and all I get is a jitters startup and the board don't go forward.
Without load it's able to spin all the way with the throttle.
Also I didn't able to make the motor detection works..
What I miss?
Thank you