stuntmanmike
100 W
I built my original Ripper mountain board about three years ago & in that time I learned a lot about what worked & what didn't. Recently a friend of mine commissioned me to build one for his son and I reluctantly obliged. Not that I didn't want to build him one, I just had to find the time to do it...
So after many early mornings & late nights it was complete.
I refined my original design by using less wire & drilling fewer holes thereby neatening up the whole thing quite a bit.
The following components were used:
1. MBS Comp 95 complete w/plastic wheels & Matrix tucks
2. MBS brake kit(used for sprocket mounting & parts)
3. 2- Alien Power Systems 63mm 245kv motors(10mm shaft)
4. 2-Mamba XLX esc's (custom program profiles)
5. 1-Pelican water proof case
6. 2- 55t wheel sprockets
7. 2- 15T motor sprockets(10mm bore)
8. 2-"Ripper" truck mount brackets(my design)
9. 4-4s 5800mah lipo's
10. #25 HD chain
There are quite a few other odds & ends like high quality hardware & wiring that I wont bore you with but if you want to know just ask.
View attachment 2
-Simple, rugged, uncluttered & it Rips for real...
So after many early mornings & late nights it was complete.
I refined my original design by using less wire & drilling fewer holes thereby neatening up the whole thing quite a bit.
The following components were used:
1. MBS Comp 95 complete w/plastic wheels & Matrix tucks
2. MBS brake kit(used for sprocket mounting & parts)
3. 2- Alien Power Systems 63mm 245kv motors(10mm shaft)
4. 2-Mamba XLX esc's (custom program profiles)
5. 1-Pelican water proof case
6. 2- 55t wheel sprockets
7. 2- 15T motor sprockets(10mm bore)
8. 2-"Ripper" truck mount brackets(my design)
9. 4-4s 5800mah lipo's
10. #25 HD chain
There are quite a few other odds & ends like high quality hardware & wiring that I wont bore you with but if you want to know just ask.
View attachment 2-Simple, rugged, uncluttered & it Rips for real...