Hi
Bought this scooter broke (chaos 1600w 48v) and i was told it needed new controller (but after testing with a multi metre it was just the throttle) and it's working now But before I start upgrades such as lipos and better controller ect, Im having problems with motor getting very hot within a mile or so (58c) I've dropped the motor sprocket from 13t to 10t and still gets to 50c+ quickly I'm not sure if this is normal temps for 1600w boma motor. I'm using original sla batts, the gearing at the minute is 10 -54, any help would be much appreciated.
I've done afew things to the scooter since I've had it like fitted speedo, lights, motor temp gauge, battery % read out, volt metre, mtb rear brake calliper ,re wired everything and water proofed battery bay.
Will upload some pics asap
Bought this scooter broke (chaos 1600w 48v) and i was told it needed new controller (but after testing with a multi metre it was just the throttle) and it's working now But before I start upgrades such as lipos and better controller ect, Im having problems with motor getting very hot within a mile or so (58c) I've dropped the motor sprocket from 13t to 10t and still gets to 50c+ quickly I'm not sure if this is normal temps for 1600w boma motor. I'm using original sla batts, the gearing at the minute is 10 -54, any help would be much appreciated.
I've done afew things to the scooter since I've had it like fitted speedo, lights, motor temp gauge, battery % read out, volt metre, mtb rear brake calliper ,re wired everything and water proofed battery bay.
Will upload some pics asap