bklynjim
1 mW
Hi all,
I'm looking at re-powering my 1996 Duffy Electric 18' boat. I'd like to use a brushless Montenergy ME 1305 and a Curtis 1232SE controller and a ET 126 Curtis throttle. There is an Ebay seller that rents the handheld 1313 programmer for $40/month. My question is for a guy with no programming experience is this a relatively straightforward task? I've looked through the manual and the throttle setting seem relatively straight forward. The ME 1305 uses inverted hall sensors and I've not yet seen where that would be set. Thanks for the advice.
Cheers!
ME1305 https://www.evdrives.com/product_p/mot-me1305.htm
Curtis Programmer https://www.ebay.com/itm/Rent-a-Cur...rentrq:c822d82c1720a994816ffca4fffadb6a|iid:1
ET126 Throttle https://www.tecknowledgey.com/amfilerating/file/download/file_id/302/
I'm looking at re-powering my 1996 Duffy Electric 18' boat. I'd like to use a brushless Montenergy ME 1305 and a Curtis 1232SE controller and a ET 126 Curtis throttle. There is an Ebay seller that rents the handheld 1313 programmer for $40/month. My question is for a guy with no programming experience is this a relatively straightforward task? I've looked through the manual and the throttle setting seem relatively straight forward. The ME 1305 uses inverted hall sensors and I've not yet seen where that would be set. Thanks for the advice.
Cheers!
ME1305 https://www.evdrives.com/product_p/mot-me1305.htm
Curtis Programmer https://www.ebay.com/itm/Rent-a-Cur...rentrq:c822d82c1720a994816ffca4fffadb6a|iid:1
ET126 Throttle https://www.tecknowledgey.com/amfilerating/file/download/file_id/302/