My dad had this beautiful outboard motor from 1961 standing for many years, he found it in the trash.. I need a new winter project so I took it :wink:
fit nice under the lid
Some paint,
fit good
Had a sprocket that fited to the axle, welded on a 12mm socket, that fit to the original drive shaft.
the prop was quite beaten up
reparied it with melted zinc, made a stainless steel form
as new
battery guage fited to the choke slot.
Now I just need to build a boat...
fit nice under the lid
Some paint,
fit good
Had a sprocket that fited to the axle, welded on a 12mm socket, that fit to the original drive shaft.
the prop was quite beaten up
reparied it with melted zinc, made a stainless steel form
as new
battery guage fited to the choke slot.
Now I just need to build a boat...