Hi all, I'm having issues getting a 750X I recently picked up working. I've followed the tutorial on how to switch to 'Battery B' with a 2-pin jumper, I've also removed the front wheel hub and replaced it with a normal wheel.
The Motor cable, I found that the white cable with heat shrink on it had torn, so soldered it back to a wire (though the cable revealed when opening up the larger cable was pink?)
EDIT: I undid the Battery 1 cable a little and saw that the white connector is supposed to connect to a bare wire outside of the metal shielding around the rest of the wires, so I soldered it onto that. I'm not sure what the pink wire is for then.
My bike has Delphi 480 connectors, and I plugged my battery (36v 14Ah 30Amp) in, and the blue REGEN light went on immediately.
However, the throttle is non-responsive. Am I missing any steps here?
The Motor cable, I found that the white cable with heat shrink on it had torn, so soldered it back to a wire (though the cable revealed when opening up the larger cable was pink?)
EDIT: I undid the Battery 1 cable a little and saw that the white connector is supposed to connect to a bare wire outside of the metal shielding around the rest of the wires, so I soldered it onto that. I'm not sure what the pink wire is for then.
My bike has Delphi 480 connectors, and I plugged my battery (36v 14Ah 30Amp) in, and the blue REGEN light went on immediately.
However, the throttle is non-responsive. Am I missing any steps here?