2019 Rad Wagon

E-Pony

10 µW
Joined
Jan 28, 2022
Messages
5
My friend tried to replace the display with a after market one. The original had a burn out due condensation build up inside. All colors matched and original connectors were soldered on. Now the new display comes on but only stays lit when holding the power button. What could the problem be?
 
Did your friend verify if the aftermarket display was compatible with the stock Radwagon controller?

Also: Wire colors do not necessarily match between manufacturers/suppliers/vendors.
 
Problem solved with upgreyyyed display and controller from Area 13 bikes. Thank you for confirming and saving some time. $199 is a inexpensive price to fix this.
 
Back
Top