onemorejoltwarden
100 W
Getting bad creak on BBHSD in low mileage Cannondale Quick on down stroke of R/drive side.
No play, Bafang crank arm, regreased, retorqued crankarms , pedals and BB.
? Should I suspect an internal problem or just creaky device?
Also getting what felt like a chain skip under power, intermittently.
Good cogs, chain was OK but I replaced it anywho. no changes.
Replaced RD, checked hanger alignment, jockey wheels, frame, chainline. bearings spin OK
I suspect the freehub ratchet, which is a no name 9spd original
Any other suspected culprits. This appears early Shimano freehub with smaller pawls inside Freehub body.
No play, Bafang crank arm, regreased, retorqued crankarms , pedals and BB.
? Should I suspect an internal problem or just creaky device?
Also getting what felt like a chain skip under power, intermittently.
Good cogs, chain was OK but I replaced it anywho. no changes.
Replaced RD, checked hanger alignment, jockey wheels, frame, chainline. bearings spin OK
I suspect the freehub ratchet, which is a no name 9spd original
Any other suspected culprits. This appears early Shimano freehub with smaller pawls inside Freehub body.