BBS02 controller change issue

Jensah

1 µW
Joined
Mar 3, 2019
Messages
4
After frying my controller i purchased a new controller for my bbs02b. Then my display showed a error 30, then i tried to flash the controller to fix it following https://www.youtube.com/watch?v=U4KdSIWpR48

This didnt affect my error 30 so i purchased a new display and cable harness. On the new display there is no error codes but the throttle or pas does not work. The display shows the brake symbol even if no brakes are connected. Could i have flashed the wrong firmware? it appears that the video is intended for bbshd. Does anyone have the original bbs02b firmware?
 
Hello! I flashed the wrong firmware to my bbs02b controller while troubleshooting and have been searching for the correct firmware with no luck. Does anyone here have the correct firmware?
 
Do you know what specific firmware version you had before? It might require the same one to operate as expected, if there are hardware/software dependencies.

There are a few threads around with firmware links or attachments, if it helps (but it may be possible to brick a controller with the wrong firmware); but I dont' have a link to a specific one which lists firmware. A search on
BBS02 firmware
will find a lot of threads, mostly unrelated, but some which do have it in there, and which may also have BBSHD firmware; I don't think they're compatible, so be careful which you get.

This thread
https://endless-sphere.com/forums/viewtopic.php?f=28&t=102148&hilit=bbs02+firmware
is for open source firmware for these systems; I don't know how far along they are.
 
Back
Top