What do in need to buy or do to connect the GRIN Frankenrunner to the EM3ev 52V (14S7P) Battery Pack?

Mr Fantastic

1 µW
Joined
Dec 22, 2016
Messages
4
Location
Sheffield, UK
What do in need to buy or do to connect the GRIN Frankenrunner to the EM3ev 52V (14S7P) Battery Pack? The battery is terminated with XT90-S, but the cable that came with the Frankenrunner terminates with Anderson Powerpoles.

this.jpg
 
Mr Fantastic said:
What do in need to buy or do to connect the GRIN Frankenrunner to the EM3ev 52V (14S7P) Battery Pack? The battery is terminated with XT90-S, but the cable that came with the Frankenrunner terminates with Anderson Powerpoles.

this.jpg

The least you'd need is a soldering iron and heat shrink tubing (or electrical tape). I'd cut off the Anderson, and strip and solder the conductors to the harness with the Anderson on the other end. Otherwise, you could get an Anderson and crimp it to the conductors of that harness, so you need to get the connector and a crimping tool.
 
Back
Top