Need help hooking up constant speed/ cruz

paul keane

1 µW
Joined
Jul 16, 2022
Messages
1
I'm trying to add cruz or constant speed to my bike but the controler has one wire and the cruz switch on the bike is a momentary switch that has two wires. I'm thinking one of the wires from the switch has to go to the wire on the controler and the other wire from the cruz switch must go to 5v or ground but I'm not sure. Any help would be greatly appreciated.
 

Attachments

  • 20221129_234429.jpg
    20221129_234429.jpg
    5.5 MB · Views: 36
  • 20221129_234325.jpg
    20221129_234325.jpg
    5.5 MB · Views: 36
On the two controllers I have with button actuated cruise, momentarily shorting the signal wire to ground activates cruise.
But you have to have brake cutoff switches to turn off the cruise.
 
Back
Top