GMAC 10T Freehub Maintenance

s_b_o_s

1 µW
Joined
Aug 25, 2021
Messages
1
I have a GMAC 10T and was wondering if anyone has been able to tear down the freehub on these motors to service the paws, bearings etc. Also does anyone know what type of freehub it is?

Kind regards

Rob
 

Attachments

  • IMG_0026.JPEG
    IMG_0026.JPEG
    598.1 KB · Views: 61
  • IMG_0027.JPEG
    IMG_0027.JPEG
    654.9 KB · Views: 61
  • IMG_0028.JPEG
    IMG_0028.JPEG
    657.6 KB · Views: 61
  • IMG_0029.JPEG
    IMG_0029.JPEG
    645.4 KB · Views: 61
I have the 8T. I haven't torn it apart. But I did ask Grin about the bearings, and their reply was that the two right side bearings were integrated into the freehub, and did I want to buy one?

Their pages for the motor lists:
Bearings:

  • Cassette side 69020 (inner), 6901D (outer)
  • Brake side 68040

That's not the answer, but I've found they are good about answering questions, so I suggest you ask - info@ebikes.ca

Also, perhaps your LBS can identify the freehub?

I'd like to know as well. FYI, they don't show the gears in the catalog, but they did sell me a spare set, in case you're interested in that.

Cheers,
sadhak
 
Also, I found this:
 
Back
Top