I was running 2-15s5p 25r in parallel but kept blowing controllers, then I made 3-14s4p, 2 in parallel in the box and I could put a 3rd battery in the tank bag for more range. got a phaserunner set at max amps but I kind of miss the twitchy throttle of a grinfinion. im switching up my batteries to 2-16s4p or 2-18s4p to see if that gives me back some power, if not ill be taking the phaserunner off this bike. I was running 40 amps@63v and wanted a little more like 60 amps but the phaserunner is really a 35/40amp feeling, it wont jerk you but once it starts going it goes quick. the 3540, I don't like the axle, wires are too tight and with the the rear tire fully dished to the right I need another 5mm to get the centerline. I can remove the derailer and put a single gear on the back and machine the right side axle about 7mm to get the center.
rear tire is 24x3.0 kenda flame- 26inch od. fronts a 26x3.0 kenda flame, you need the fat tires and suspension seat to smooth out the ride. you wont see many stilettos with this seat, the triangular seat bracket is aftermarket I believe. I bought this bike used from someone that lost interest in it.
it had the motor,controller and ca, the Anderson phase connectors were melted because it was wired wrong ill try to get a pic loaded of the bike when I bought it.