asvybre
1 mW
Hi everyone!
I've been working on a 3000W e-bike build for the past months and I found lots of useful information and tips here on ES.
So, I decided to share my build so far and get some tips hopefully
Using a chinese copy of an ebb frame that I got here in Portugal for 200€ + rear shock (crazy price, the guy was desperate) and MXUS 3K-Turbo.
Frame and shock.
MXUS 3K-Turbo.
Display that came with the motor kit on full throttle
Right now I'm trying to figure out which winding the motor has, because there is no visible markings on the motor it self.
On 82V the motor seams to run at about 590RPM, that concluded from my calculations using the iPhones slow-mo :lol:
It pulls about 1A at that voltage which unfortunately seams to point that it is a 5T winding, I was looking for a 3-4T
What wheel would you suggest? (19"?)
The battery I will be making myself since I have good experience on that ground.
20S10P is what I am looking for and if possible VTC6 cells or other high current cells.
Also, a BMS that is relatively affordable and trustworthy is what I'm trying to find!
Front suspension as of now is an unknown part of the build since I would like to keet it balanced and also not break the bank.
If you have a suggestion, please share it with me.
PS: I also did a 3D drawing of the frame I have (not all dimensions are as they should) on Solidworks.
I've been working on a 3000W e-bike build for the past months and I found lots of useful information and tips here on ES.
So, I decided to share my build so far and get some tips hopefully
Using a chinese copy of an ebb frame that I got here in Portugal for 200€ + rear shock (crazy price, the guy was desperate) and MXUS 3K-Turbo.
Frame and shock.
MXUS 3K-Turbo.
Display that came with the motor kit on full throttle
Right now I'm trying to figure out which winding the motor has, because there is no visible markings on the motor it self.
On 82V the motor seams to run at about 590RPM, that concluded from my calculations using the iPhones slow-mo :lol:
It pulls about 1A at that voltage which unfortunately seams to point that it is a 5T winding, I was looking for a 3-4T
What wheel would you suggest? (19"?)
The battery I will be making myself since I have good experience on that ground.
20S10P is what I am looking for and if possible VTC6 cells or other high current cells.
Also, a BMS that is relatively affordable and trustworthy is what I'm trying to find!
Front suspension as of now is an unknown part of the build since I would like to keet it balanced and also not break the bank.
If you have a suggestion, please share it with me.
PS: I also did a 3D drawing of the frame I have (not all dimensions are as they should) on Solidworks.