Eleek lite build

Nixunen

10 W
Joined
Aug 27, 2018
Messages
80
I wanted to build light, but still powerful ebike. I choose Eleek Lite frame to start with. I wanted to do it in fat-version. Bike has been ready about one year and 3 month. And i have been drive it about 17 000km so far.

My bike specs are:
Frame: Eleek Lite Fat
Motor: "Mxus 3k" fat clone
Battery: 20S7P (LG HG2 cells and ant bms)
Controller: Nucular 12F
Brakes: Hope Tech 3 E4 with 203mm brake discs
Rear suspension: DNM rcp-2s (750lbs coil)
Front light: Lupine SL X
Front blinkers / turn signals: Motogadget mo.blaze discs
Rear blinkers: Kellerman Atto

Also there is arduino inside bike. It is used in alarm system. Start bike with rf keychain, control blinkers, battery heater, gps etc.

Here is first picture when i started to build my bike, nothing special about it:
69558942_10217476382996233_1408907469618413568_o.jpg

Next i build wheel and opened motor and added ferrofluid inside:
75282278_10218038033157136_2339483765761376256_o.jpg

There is picture when ferrofluid is applied on the magnets:
78801330_10218302740254648_6581013984902643712_o.jpg

I didn't take photos each step, so next picture is when bike has wheels and side cover color is changed to red. Also rear shock is red:
83377910_10218694215921295_1442198439734542336_o.jpg

I continue to add more pictures soon. I need to resize them etc.
 
There is picture of my first ride. Bike was almost complete:

109285927_10220435105922457_6317075054958634654_n.jpg

And there one picture little bit later:

120617379_10221085054770772_3455431074315533117_n.jpg
 
There is video about my front blinkers (they also show in rear, but mainly front)

[youtube]Nj6ylBZQC7o[/youtube]
 
And there is very short video about rear blinkers:

[youtube]wGXDsZUaKO0[/youtube]
 
hello
I also saw theses frame on vector website, who is the original seller? is it aliexpress no name frame at the start?
 
Back
Top