Bypassed the key activated relay, and connected directly the positive battery & controller's wires. There was a spark in the connector, and the controller stopped working ever since.
It's a 48v system. Using XT90 connectors. It's a 40 amp continous draw setup.
Is this a common fault? What should I look for?
Sent from my LM-G850 using Tapatalk
It's a 48v system. Using XT90 connectors. It's a 40 amp continous draw setup.
Is this a common fault? What should I look for?
Sent from my LM-G850 using Tapatalk