Hi all,
Does anyone have any older style Mac parts? I have 2 bare motors, gears, etc, but no hub or brakeside covers. Any help would be greatly appreciated!
To Mac owners, the broken hub was a result of spoke over tightening. It split at the joint, bent covers. This was using 13/14g butted spokes, and JRH nipples for a 19" moto rim.
The second motor was used,"in perfect condition". I had to replace the halls, and wiring, and added a temp sensor, and new clutch,gears, etc. Of course, there are stripped bolt holes on both the cover, and, the disc mount. The holes for the covers had already been relocated, redrilled, and tapped, once before. Buy used carefully, and go easy on those little cover screws especially.
There must be a few broken Mac's out there. No?
Does anyone have any older style Mac parts? I have 2 bare motors, gears, etc, but no hub or brakeside covers. Any help would be greatly appreciated!
To Mac owners, the broken hub was a result of spoke over tightening. It split at the joint, bent covers. This was using 13/14g butted spokes, and JRH nipples for a 19" moto rim.
The second motor was used,"in perfect condition". I had to replace the halls, and wiring, and added a temp sensor, and new clutch,gears, etc. Of course, there are stripped bolt holes on both the cover, and, the disc mount. The holes for the covers had already been relocated, redrilled, and tapped, once before. Buy used carefully, and go easy on those little cover screws especially.
There must be a few broken Mac's out there. No?