Steveo's Hubmonster Project ebike

Have extra parts that need a good home? Post it up here and see if anyone else is searching for what you are selling.
Post Reply
User avatar
steveo   1 MW

1 MW
Posts: 1783
Joined: Oct 06 2007 3:07pm
Location: Woodbridge, Ontario

Steveo's Hubmonster Project ebike

Post by steveo » Jul 12 2020 1:24pm

It has the famous dual winding hubmonster motor with a custom extendable swing arm. Controllers have been sold already, however using any cheap xichang or similar controllers will be a super cheap way of running it on a budjet.

It has a used inverted marzocchi fork, rear motorcycle brake caliper/rotor setup, 4 piston front brake caliper setup with 203mm rotor. Enduro front tire with a custom rim and hub for the front end to work.

I have a battery for it also, ant bms with 6p26s made with a123 M1A 2.3ah cells

I have led head lights, cycle analyst for it also.

3200$ USD for the whole setup plus shipping

Yt video when I had it running last

Fork and battery in video was the old fork/battery I started with.

For quickest response email me at:

Repair Thread ... =3&t=27170
Hub Monster bike ~ 24s7p A123 15.4ah/18kv Six Phase Motor/Dual Max-E Adapttos/32kw~42.91Hp/Est 140LBS
X6 Kmx Trike ~ 24s4p 20ah/X6 MHM 602/Infinion EB324 IRFB 4110/20Kw~26.82Hp/Est 120LBS ~SOLD~
Lightening rods bike ~ 18s2p 10ah/1500w Inrunner/Infinion EB312 IRFB4110/2KW~2.68hp/Est 60LBS
EV Outboard ~ 12s8p 40ah/5KW GM Inrunner/Infinion EB324 IRFB 4110/18Hp Evinrude Drive/Est 100lbs

Maniaccts   10 mW

10 mW
Posts: 29
Joined: Oct 12 2015 5:49pm

Re: Steveo's Hubmonster Project ebike

Post by Maniaccts » Aug 13 2020 6:11pm

How much for the cycle analyst

Post Reply