[sold] QS205 v3i eBike

c.wagner

100 mW
Joined
Apr 9, 2020
Messages
49
Selling my basically brand new QS205 v3i "eBike" variant.
I needed the "eScooter" variant so that was an incorrect order.
The motor comes with statorade (ferrofluid), added by the manufacturer itself.

Specs:

- QS205 V3i
- 11.3 Kv
- 6mm² phase cables
- dual Hall sensor
- dual Temp sensor

Price new was 455€ plus ca. 20% import cost, is 540€

Shipping inside EU and UK.

If you need any measurements or information regarding the motor or your project, feel free to ask :)

I can also provide you with a set of hubsink v2 cooling fins which lets you push >20kW peak without any heating issues.

20200908_161106.jpg
20201218_203213.jpg

IMG20210328200049.jpg
IMG20210328200417.jpg
IMG20210328200501.jpg
qs205-drawing.jpg
 
My stealth bomber has 170mm dropouts ....
This is 150mm dropouts ? Can I add spacers or ?
 
This is 150mm dropout min and 220mm dropout max.
Sure, you can either use spacers (or metrical nut) or maybe your swingarm is flexible enough to "bend" the 2cm :D
 
Unfortunately no, it´s just the motor with statorade (the rim is still in use, I just changed motor because I bought the wrong one).
But if you need an additional heatsink (hubsink v2), I can help you out.
 
Back
Top