Sevcon gen4 48v 275a from a vectrix VX2 + 48v original battery (France, EU)

csc

100 W
Joined
Dec 13, 2016
Messages
176
This controller had been working 212km or so when I extracted it from a vectrix VX2 (directly replaced by a Nucular 24f)

It communicates in CAN with the original battery and won't start without a link with the bms ! I'm not a can programmer so, it's yours if you can deal with that : 200 euros

I can sell the original battery/bms/charger too if needed : 900 euros. 48v 50ah lithium, in good shape, perfectly balanced, stored at 49v and checked regularly, 212km also as it was directly replaced by a 72v pack.

And all the motion electronic accessories from the VX2, except the two way throttle and the motor.

Shipment possible at your cost

Cheerio !

file.php
 

Attachments

  • 20220313_115404.jpg
    20220313_115404.jpg
    995.3 KB · Views: 363
What are your plans with the Vectrix?
Are you going for a bigger battery and running wayyy more power?
Just curious as i have similair model scooters!
(govecs s2.4 and Emax 120s)
 
Back
Top