SilverLine
100 W
I do not have a controller yet. Waiting on a vesc6 project. (Only max 20s)... But on YouTube, a user runs this motor on a 96v pack, and hit 150 kmh on his bike
https://youtu.be/AB5WWC_uYBA
https://youtu.be/AB5WWC_uYBA
SilverLine said:Usually the heat is the problem...
SilverLine said:https://youtu.be/AB5WWC_uYBA
Torti said:These are the data from the engine.
Which does:
Leerlaufdrehzahl: 3800 U / min ohne Dämpfung, 6000 U / min mit Dämpfung.
Artikel: QS 3000 Watt Motor 138 70 h Mittelmotor
Motortyp : BLDC-Permanentmagnet-Innenläufermotor mit Hallsensor
Markenname: QS Motor, QSMOTOR
Motorkonstruktion: einachsig
Entsprechende Räder: 12-Zoll-Räder (Standard)
Magnethöhe: 70 mm, 40 Stück, 5 Polpaare
Statordurchmesser: 138 mm
Leistung: 3000 W
Nennspannung: standardmäßig 72 V
Geschwindigkeit: 100 km / h
Leerlaufdrehzahl: 3800 U / min ohne Dämpfung, 6000 U / min mit Dämpfung.
Maximales Drehmoment: Ca. 56n M ohne Untersetzungsfaktor, ca. 247n. M mit einem Untersetzungsverhältnis von 1: 4. 77
Untersetzungsverhältnis: 1: 4. 77 (Standard)
Maximaler Wirkungsgrad: 88%
Gleichstrom Batterie: Standby (72 V)
Spitzenbatteriestrom: 120A (72V)
Geschätzter Spitzenphasenstrom: 450A
Thermische Sonde: Nein Standard (KTY8 3 /122, wenn Sie brauchen, bitte die Verkäufer informieren).
Betriebstemperatur bis gegeben
Single Hall Plate mit wasserdichten Steckern
16 mm² Leiterquerschnitt (ohne Isolierschicht)
Hall-Sensor-Interferenzwinkel: 120 Grad
Wasserdichter Grad: IP54
Farbe schwarz
Nettogewicht / Bruttogewicht: 10,8 kg / 11,5 kg
ZERONEST said:Planning on ordering this to the UK.
https://www.aliexpress.com/item/33056354249.html?spm=2114.12010612.8148356.30.543563f84Jjq7c
Anything I should know before I do?
Thanks
multifrag said:ZERONEST said:Planning on ordering this to the UK.
https://www.aliexpress.com/item/33056354249.html?spm=2114.12010612.8148356.30.543563f84Jjq7c
Anything I should know before I do?
Thanks
Not related to the product, but due to shipping taking long time we have no idea what will be with brexit. Your parcel might be stuck at the port and not be allowed in due to no regulations if we go out with no deal.
The extensions has been approved, so order without worry.
PITMIX said:yes I think it's tight with red Loctite. Normally I can disassemble the alternator pulleys like this without any problem.
Torti said:but the wires of the cables do not match
which can 120a max 300A