silentguy
100 W
- Joined
- Sep 15, 2009
- Messages
- 162
skestans said:silentguy said:General question
I just installed a 36v tsdz2 motor and 850c display that came pre flashed with v19 of the OSF.
Is there any physical difference between the 36v motor (as identified by sticker in motor case) and the 52v motor ? Are they the same motor. ?
I’m wondering if I should have gotten the 48V/52v motor, however I wasnt given a choice.
Just told it was 750 Watts.
I’ve successfully used up to 60v on the motor , but limited the current to 16A.
I just don’t want to melt the motor.
This is explained on the wiki: https://github.com/OpenSource-EBike-firmware/TSDZ2_wiki/wiki/FAQ#TSDZ2_different_versions
Thanks for the link.
I read now that there are differences in the 36v and 48v motors. What’s the specs on each motor as didn’t see that in the wiki. Both are 750 Watts ?
Is the safe Overvolting 58.8 volts for 48/ 52v motor ?
What about Overvolting a 36v motor. ?