Stealth Bomber type electric enduro purchase
- Thread starter E5J7R
- Start date
j bjork
100 kW
Battosaii said:
It has 100v components..
Not very much research needed, it is on the first page of their thread:
https://endless-sphere.com/forums/viewtopic.php?f=31&t=75494
Just quick pic update...
-new forks DNM usd-8. (Waaaay better than old ones)
-Muckynutz Fenders front and rear
-EVA foam on case and swing arm
-Dakine Snowboard stomp pad on side covers of case
-3M Rubber tape on chain stay for slap
-Spank spike vibrocore riser bars
-Quad lock phone mount
-Xpedo flat pedals
-Hafny mirrors mounted reverse/upside down (unobstructed view)
I made a cool but simple hack for a Bouncy kickstand. Just use a short bungee cord or Even a thin headband sized hair tie with a c-clip.
Another DIY idea is going to be pictured below. It’s just a marker held by mini locking pliers for trying a wheel on a wheel stand. Cheaper than paying a shop or buying a truing stand.
I also have duro Razorback 26”x 3” tires to put on next
Waiting to buy new controller still, mine is square wave and I hate the vibration from the magnet grab at super low speed and at 25-30 it is horrible.
Found my cells are legit Panasonic PF’s 20s14p 72v 40.6ah
Looking for good BMS to rewire battery for better discharge.
Current bms only does 80A . Looking to get about 120 as cells are 3C. Any suggestions For bms / Controller pairing?
Anyway thanks again guys and hope you are all doing, staying safe , and still riding.
-new forks DNM usd-8. (Waaaay better than old ones)
-Muckynutz Fenders front and rear
-EVA foam on case and swing arm
-Dakine Snowboard stomp pad on side covers of case
-3M Rubber tape on chain stay for slap
-Spank spike vibrocore riser bars
-Quad lock phone mount
-Xpedo flat pedals
-Hafny mirrors mounted reverse/upside down (unobstructed view)
I made a cool but simple hack for a Bouncy kickstand. Just use a short bungee cord or Even a thin headband sized hair tie with a c-clip.
Another DIY idea is going to be pictured below. It’s just a marker held by mini locking pliers for trying a wheel on a wheel stand. Cheaper than paying a shop or buying a truing stand.
I also have duro Razorback 26”x 3” tires to put on next
Waiting to buy new controller still, mine is square wave and I hate the vibration from the magnet grab at super low speed and at 25-30 it is horrible.
Found my cells are legit Panasonic PF’s 20s14p 72v 40.6ah
Looking for good BMS to rewire battery for better discharge.
Current bms only does 80A . Looking to get about 120 as cells are 3C. Any suggestions For bms / Controller pairing?
Anyway thanks again guys and hope you are all doing, staying safe , and still riding.
Attachments
markz
100 TW
You need more white on that enduro ebike, and perhaps more Ah in the battery :wink: :wink:
markz said:
Working on it, it’ll be blinding in color and speed soon... lol
Looking at my pics again, I just realized I forgot to take the zip ties (using for reference while truing my wheel) off of the swing arm... I was wondering what the little clicks noise that kept coming last night while I was riding... too dark to see them on side of road. Also I’m using a 3D printed chain tensioner that I forgot to mention above.
