*join the party*
first impression of the Bike is quite good.
Pedal assist works nice.
Throttle.....well. Not sure whats going on in the middle of 30s kph.
but it switches also the sound (maybe switch to sensorless mode) and above that speed almost a 2 seconds "delay" when you open the throttle quick.
like a huge ramp.
everything below ~30 the throttle works way better. worlds more Responsive.
I hope some 64 guys here have more experience about the throttle with Silixcon controller?!
The speed limit at 45kph is oscillating a bit and could be smoother.
Setting wise software allows only to setup power, torque and speed settings.
no throttle calibration, battery settings, wheel settings.
controller isnt setup with LVC. If Battery gets empty you will hard cut from the BMS.
No Power reduction as it could be.
The Display allows only to setup 28/27.5/27/26/24 inch wheels. I had to setup to 26inch to be close to real speed.
But it would be nice if i could setup the real speed to have also real range.
Yesterday i put the bike on a scale......well....that was a bit more than expected. 32.3Kg *oumph*
i noticed that already on pulling the bike out of the box. I wonder if the "Legal L1e stuff" have fully 5Kg additional weight.
crazy....time to strip that baby
Display shows mostly 2.5-2.6kw of Power and that felt pretty nice.
No real offroad ride yet but feels promising to beat the Bosch/Shimano feelings
the BELT is fantastic. Coming from the 161 chain massacre this bike is so silent and a whole new experience that ppl doesnt turn around before the even see me :lol: