Hi all!
I am hoping someone can diagnose this problem. Its my qs205 connected to 72V and sabvoton 72150 controller. Its not a controller problem as its new and i tested my other motor with it and was all fine.
At 1/4 throttle the motor runs perfectly but getting close to 1/2 or more throttle..the motor starts the sputter and sometimes stop suddenly but then sometimes im able to go full throttle without a problem and it doesnt happen that often.
There is no error on the controller app and as you can see in the video..even after the first initial stop the motor can still turn as normal. Near the end of the video is where you can hear the sputtering more clearly.
Thanks a lot!!!
https://vimeo.com/511888522
I am hoping someone can diagnose this problem. Its my qs205 connected to 72V and sabvoton 72150 controller. Its not a controller problem as its new and i tested my other motor with it and was all fine.
At 1/4 throttle the motor runs perfectly but getting close to 1/2 or more throttle..the motor starts the sputter and sometimes stop suddenly but then sometimes im able to go full throttle without a problem and it doesnt happen that often.
There is no error on the controller app and as you can see in the video..even after the first initial stop the motor can still turn as normal. Near the end of the video is where you can hear the sputtering more clearly.
Thanks a lot!!!
https://vimeo.com/511888522